BSIS0 6626-2:2024 BSl Standards Publication Internal combustion engines Piston rings Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron bsi. BS IS0 6626-2:2024 BRITISH STANDARD National foreword This British Standard is the UK implementation of IS0 6626-2:2024. It supersedes BS IS0 6626-2:2013, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee MCE/22, Engines for road vehicles. A list of organizations represented on this committee can be obtained on request to its committee manager. Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract. Users are responsible for its correct application. @ The British Standards Institution 2024 Published by BSI Standards Limited 2024 ISBN 978 0 53917096 2 ICS 43.060.10 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2024. Amendments/corrigenda issued since publication Date Textaffected BS IS0 6626-2:2024 International ISO Standard ISO 6626-2 Third edition Internal combustion engines - Piston rings - 2024-07 Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron Moteurs a combustion interne - Segments de piston - Partie 2: Segments racleurs régulateurs d'huile étroits, en fonte mis en charge par ressort helicoidal Reference number IS0 6626-2:2024(en) @ISO2024